Promise Technology VTRAK J300S Guide De Démarrage Rapide page 7

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 31
Each I/O module has two table-routed external receptacles (CN1 and CN2) and
one subtractive-routed external receptacle (CN3).
SAS HBA cards and cables are User-supplied items. They are not
included with the VTrak unit.
Basic DAS Connection
PC
Figure 8. An example of a basic DAS connection between one Host PC
and one VTrak J300s unit
The arrangement above is the minimum DAS system with a single SAS HBA
card in the Host PC. Connect the SAS card to the table-routed port (CN1) on the
I/O module.
Use a SFF-8470 4X to 4X external SAS cable with thumbscrew connectors
(supplied with the J300s unit).
Because the Host SAS HBA card is an end device, you can connect it to any of
the three SAS ports (CN1, CN2 or CN3) on the J300s unit's I/O module.
All manuals and user guides at all-guides.com
Subtractive-Routed Port
SAS HBA Card
7
Step 4: Set Up Data Cable Connections
Note
O
I
VTrak J300s
SFF-8470 external
4X to 4X SAS cable
O
I

Publicité

Table des Matières
loading

Table des Matières