White&Brown Tosca EX 824 Mode D'emploi page 15

All manuals and user guides at all-guides.com
notice EX 824-reso 12/12/05 10:49 Page 15
4/ The first shot does not come out or flows too slowly :
- Check the filter containing the ground coffee. If holes are blocked, they should be cleaned with a
small brush or suitable tool.
- It is also possible that a slow supply of coffee is caused by insufficient supply of water from the
perforated disc in the filter ring housing. In fact, it is possible that after several months of use, grea-
se or mineral deposits may obstruct the disc. In this case, operate the machine without the filter
basket in place, allowing the water to flow. If the water does not flow uniformly from all holes, it
means that the disc is clogged. Take the machine to the closest Authorized Service Centre to have it
cleaned.
- The tank is not inserted well. Fit the tank securely by pushing it as far as it will go.
- There is little water and the pump does not suck it up. Fill the tank.
- If the problem persists after performing the above mentioned operation, go to an Authorized
Assistance Centre.
5/ The coffee is too watery and cold
- The blend has been ground too coarsely.
- To obtain a more concentrated and hotter shot, finer ground coffee must be used.
- If the problem persists after performing the above mentioned operation, go to an Authorized
Assistance Centre.
15