Battery Insertion/ Exchange - Crivit Pro CBGT 4 A1 Mode D'emploi

Returning the packaging to the material cycle conserves raw
materials and reduces the amount of waste that is generated.
Dispose of packaging materials that are no longer needed
in accordance with applicable local regulations.

Battery insertion/ exchange

♦ Turn the battery compartment cover on the rear of the speed sensor
anticlockwise using a coin, and then remove the battery compart-
ment cover.
♦ Remove the battery and insert a new battery of type CR2032 into
the battery compartment. The positive terminal should face upwards.
CAUTION
► The battery should only be replaced in a dry environment. When
replacing the battery, ensure that the sealing ring in the battery
compartment is not damaged or lost.
♦ Close the battery compartment again by turning the battery com-
partment cover clockwise until the two arrowheads on the battery
compartment cover and housing are facing each other.
CBGT 4 A1
All manuals and user guides at all-guides.com
€
Sealing ring
GB │ IE │ 35 ■