Publicité
support@nextlevelracing.com
08
Slide the ERS1 Seat all the way back to access the front holes on the Seat Sliders.
09
Bolt through and secure using 2 x M8 Low Profile Bolts.
SEAT RECLINER ADJUSTMENT
Lift both Seat Recliner Levers and adjust the Seat Back to the desired angle. Release the levers to lock
10
in place.
PARTS:
• • NIL
PARTS:
• • 2 x M8 20mm Low Profile Bolts
PARTS:
• • NIL
14
WARNING
Please do not use power tools for assembly as over tightening can damage parts.
If in doubt consult the installation video or contact us on support@nextlevelracing.com
Make sure all mounting points are aligned correctly to avoid twisting your seat or fame.
Lay out and build on a level surface.
Do not force parts together.
Avoid cross threading bolts.
Take care when adjusting the Seat Recliner to avoid injury.
ASSISTANCE
ASSEMBLY
bit.ly/nlrbuild
If you require further support with your product please
contact our friendly team at: support@nextlevelracing.com
15
Video Instruction: bit.ly/nlrbuild
VIDEO
Publicité
