Publicité
support@nextlevelracing.com
PRE-RACE
CHECKS
WARNING
• Please do not use power tools for assembly as over tightening can damage parts.
• If in doubt consult the installation video or contact us on support@nextlevelracing.com
• Make sure all mounting points are aligned correctly to avoid twisting your seat or fame.
• Take care when adjusting the Seat Recliner to avoid injury.
• Lay out and build on a level surface.
• Do not force parts together.
• Avoid cross threading bolts.
WARNING: RECLINERS SHOULD ONLY BE ADJUSTED ONCE THE SEAT BACK IS
If you require any support with
your product please contact our friendly team at:
support@nextlevelracing.com
WARNING
CHOKING HAZARD - Small parts not for children under 3 years
or any individuals who have a tendency to place inedible objects
in their mouths.
ASSEMBLY
VIDEO
bit.ly/nlrbuild
4
IN THE
BOX
*NOT TO SCALE
1 x SEAT BOTTOM
(
)
(
)
LEFT
RIGHT
SEAT RECLINER TOP COVERS
4 x M8 WASHERS
4 x M8 20mm LOW PROFILE BOLTS
Video Instruction: bit.ly/nlrbuild
1 x SEAT BACK
4 x STEEL SEAT SPACERS
2 x M5 12mm MACHINE SCREWS
M8 ALLEN KEY
M6 PHILLIPS HEAD ALLEN KEY
NOTE: Some Items Come with Rust Resistant Coating
5
Publicité
