Stand Instruction - Sylvania SDPF870 Manuel D'instruction

in, Split Vertical out, Radiation, Surround, Fade, Right refresh, Next refresh, On Pan,
Roll from down to up, Roll from up to down, Brick
7.7 photo mode: Auto Fit, Optimal, full
7.8 Display
Contrast: Use
Brightness: Use
Saturation: Use
Tint: Use
7.9 Set time/date: Press
select, then press "Save Time" to save the setting.
7.10 Set Time format: 12/24, Press
7.11 Format build-in memory:
Press enter, use
7.12 Reset setting:
Press enter, use
press to confirm.
7.13 Exit: Press to exit.

8. Stand Instruction

Screw the bracket into the slot of the digital photo frame, rotate the bracket until it is
locked in place. The digital photo frame can stand horizontally or vertically. Please refer
to the illustration shown below.
All manuals and user guides at all-guides.com
to select from 00 (lowest) to 40 (highest).
to select from 00 (lowest) to 40 (highest).
to select from 00 (lowest) to 40 (highest).
to select from 00 (lowest) to 40 (highest).
to enter, Press
to set, use
to select or unselect to format the built-in memory.
to select or unselect to reset all settings to default values,
and to select, then use
to confirm.
to
9