Using The Timer - Speedlink ACUTE VIBE Mode D'emploi

EN

USING THE TIMER:

1. Start the presenter by switching the On/Off button to "On".
2. Press the "Set timer" button . The dots in
display start blinking.
3. Set the minutes with the "Forward" and
"Backward" buttons.
4. Press the "Set timer" button again to apply the time.
Dots in display stop blinking.
5. Start the timer by pressing the "Countdown" button .
The presenter will send a vibrating signal.
6. Press the "Countdown" button to pause the timer.
The presenter will vibrate twice to affirm the pausing.
7. The presenter will vibrate 4 times, when the time is up.
8. Hold the "Countdown" button for ca. 3 seconds to reset the
timer. The presenter will vibrate 4 times to affirm the reset.