ferolli CONNECT Notice D'installation Et D'utilisation page 44

On this screen (fig. 14), if the boiler is connected via OpenTherm protocol, it is
All manuals and user guides at all-guides.com
possible to display its status. Also, by clicking on the symbols , the boiler
DHW and heating set points can be changed.
If the boiler is connected via On-Off contact, only the status of the request is
displayed (fig. 15).
fig. 15 With room thermostat
fig. 14 - With OpenTherm
44
EN
cod. 3541S181 - Rev. 00 - 09/2020