Publicité
Les langues disponibles
Les langues disponibles
assembly instructions
Weight Capacity: 400 lbs (181 Kg)
1.
Remove contents from carton.
2.
Turn seat up-side-down. Place the leg section
marked with a "B" into the groove on the bottom
of the seat. Place leg section "A" on top of
section "B" and secure both in place by inserting
the shorter thumb screw through the middle hole
as shown below.
3.
Assemble backrest by taking the "L" shaped
backrest supports and securing them to the
back rest using the shorter thumb screws as
shown below.
4.
Attach backrest to the seat by aligning holes on
"L" shaped frame supports with the holes on the
leg sections. Secure in place using the longer
thumb screws, making sure to pay attention to
the "rear" of the seat marked on the bottom of
the chair.
Note: Seat depth can be adjusted by chosing 1 of the
2 holes on the frame supports.
5.
Insert legs into leg frames by depressing push
pins, sliding legs over the receptacle and setting
to desired height. Make sure all the legs are set
to the same height.
Publicité
