Williams Sound SoundPlus WIR 237 Mode D'emploi page 7

All manuals and user guides at all-guides.com
5
If an RCA connection is unavailable,
TV Microphone
use the provided TV microphone to
pickup the sound source directly
from the TV loud speaker as shown
on right.
TX238 Transmitter (Rear View)
1
2
Plug the Power Supply cord into the "DC 12V" jack
S 1: C
TEP ONNECT THE
back of the TX238. Then plug the Power Supply into an AC
outlet. When the receiver is placed into the charging cradle built
into the top of the transmitter, the center charging indicator on
the front of the TX238 will turn on. When the spare battery is
plugged into the left or right battery charging port on the trans-
mitter, the corresponding charge indicator light will turn on.
Use the supplied red and white RCA audio cables to connect the
S 2: C
TEP ONNECT THE
TX238 Transmitter directly to the TV, VCR, or stereo "AUDIO
OUT" jacks. If your television does not have "AUDIO OUT"
jacks, you will need use the supplied TV microphone. See page
9 for TV microphone instructions.
3
T P
RANSMITTER OWER
T
RANSMITTER TO THE
OR
4
on the
1
S
UPPLY
A S
UDIO OURCE
7