CABASSE Xo SYSTEM 92 dB Notice D'utilisation page 17

Setting your amplifier
The table below shows the adjustments to make.
SPEAKERS
LEFT AND RIGHT FRONT
CENTRE
LEFT AND RIGHT SURROUND
SUBWOOFER / LFE
TROUBLESHOOTING
If you have a problem with your Xo SYSTEM 5.1 speaker system, turn off your
sound source and try the solutions below. If you still have a problem, contact your
Cabasse dealer to arrange for service.
PROBLEMS
The system does not function
at all
No sound
Not enough or too much bass
No surround sound
CLEANING THE SPEAKERS
The cabinets of Xo SYSTEM speakers may be cleaned with a soft damp cloth.
Do not use any sprays near the system or allow liquids to spill into any openings.
Also, do not use any solvents, chemicals, or cleaning solutions containing alcohol,
ammonia, or abrasives.
All manuals and user guides at all-guides.com
SOLUTIONS
- Make sure the amplifier and the subwoofer plugged into an
operating AC wall outlet and that the subwoofer is turned ON or
AUTO.
- Be sure that the right source is selected on the amplifier (video,
CD, DVD, tuner...).
- Check the speaker connections.
- Turn the subwoofer on ON or AUTO.
- For digital sound, be sure a coaxial or optical cable connects the
digital output of the DVD player with the digital input on your
receiver.
- Move the subwoofer closer to a wall or a corner to increase very
low bass frequencies.
- Move it farther away from a wall or a corner to decrease very
low bass frequencies.
- Adjust the LFE level control of your audio video amplifier.
- Check that the adjustments of your audio video amplifier are
correct.
AMPLIFIER
LARGE
ON
17