Mitsubishi Heavy Industries GT Serie Mode D'emploi page 9

Speed control lever & Engine Switch
Open the speed control lever a
little toward the high-speed side.
Starting with the electric-starter
• Turn the key switch to the
START ( ) position.
• If the engine does not start after
running of the electric starter for
5 seconds, wait 5 seconds
before trying to start again．
• After turning the switch to the
START ( ) position and
releasing the key switch will
automatically return to the ON
( ) position.
Fuel cock
Close Close
Close the fuel cock.
All manuals and user guides at all-guides.com
Open Open
slightly. slightly.
• Hold onto the starter grip and lightly pull it
until the compression position is reached and
then pull swiftly from this position.
• Slowly return the starter grip to its original
position after the engine starts.
― 7 ―
Choke lever
• Completely close the choke.
Recoil start
Check Check