Télécharger Imprimer la page

Playing Music Function; Height Measuring Function; Automatic Screen Backlight; Fast And Easy Operation - weewell WWD700 Mode D'emploi

Pese-bebe numerique

Publicité

Les langues disponibles

Les langues disponibles

Playing Music Function:

1.
Playing Music; while the scale is on, press the MUSIC Button to play music. You
can change music by pressing the same button. There are 35 music options.
2.
Music ON/OFF; while the scale is OFF, pres and hold SET button and pres ON at
the same time. You will see "ON" on the screen, music function is enabled. When
you pres the SET key again, you will see "OFF" on the screen and music function is
disabled.

Height Measuring Function:

There is a 150cm measuring tape on the left side of the scale to measure your
baby's height. You can rewind measuring tape by pressing the button located
under the measuring tape exit hole.

Automatic Screen Backlight:

If there is no operation on the scale, backlight will turn off automatically after
15 seconds. It will turn on automatically when the scale is re-operated.

Fast and Easy Operation

1.
Open the package and insert the batteries.
2.
Put the scale on a horizontal surface, and lay a blanket on it. Do not let the
blanket touch the ground or extend over the edge of the scale, it might cause
inaccurate weighing.
3.
Press ON/OFF/TARE Button and wait to see 0,000kg on the screen.
4.
Place your baby on the center of the scale.
5.
You can see the weight of your baby when the value is fixed and music starts to
play (please see playing music function above).
6.
In case there is no operation the scale turns off in 60 seconds automatically.

Cautions

1.
Place your baby on the center of the scale for an accurate weighing.
2.
If there is anything unusual, please remove the battery and wait for 10 minutes.
Then replace batteries and try again.
All manuals and user guides at all-guides.com
WWD700 USER MANUAL
I
5

Publicité

loading