U.S.Robotics USR8200 Guide D'installation page 6

Step Two:
Using an Ethernet cable, connect your
computer to a LAN port on the USR8200. Repeat this
step for any additional computers.
Step Three:
Connect a USB and/or FireWire hard
drive, if available. You can also connect a USB printer,
if available.
Step Four:
Turn on your cable or DSL modem. Turn on
your printer or hard drive, if applicable. Connect the included
power adapter to the USR8200 Firewall/VPN/NAS. Plug the
power adapter into a standard power outlet. Turn on your
computer.
Launch a Web browser. In the location or address line of your Web browser, type http://usr8200
to access the Web-based Management. This will advance you to the Welcome screen where you
can select your corresponding browser and, if need be, bookmark or add the Web-based Manage-
ment URL to your Favorites folder. Click OK.
This will advance you to the Login Setup screen. Here you will create and enter a user name and
password in the corresponding fields. Click OK. When the Configuration Utility launches, enter
the appropriate information to configure the USR8200 Firewall/VPN/NAS. For more detailed con-
figuration information, go to the User Guide on the Installation CD-ROM or go to the Support area
at www.usr.com
2