Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
RANDOM PLAYBACK
During CD-R/RW stop mode, press the RANDOM button once; the random indicator will light and the unit will then play
the tracks in a random order. Press the STOP button to cancel the random setting and the random indicator will turn off.
Note:
During RANDOM playback, press the REPEAT button once to activate repeat 1 playback. The REPEAT LED indicator will
blink and the RANDOM LED indicator will light solid. the player will play your selected track repeatedly till you cancel the
REPEAT function by pressing the REPEAT button twice, the repeat LED indicator will go out. RANDOM function cannot
be used during repeat 1 mode.
REPEAT PLAYBACK
1.
To repeat a single track, press the REPEAT button once, the repeat LED indicator will blink, press the SKIP REV
button or SKIP FWD button to select the desired track, press the PLAY/PAUSE button to begin repeat playback of
the selected track.
2.
To repeat all of the tracks on a disc continuously, press the REPEAT button twice, the repeat LED indicator will light
solid. Press the PLAY/PAUSE button to begin repeat playback of the entire disc.
3.
To cancel repeat playback, press the REPEAT button until the repeat LED indicator turns off.
4.
Repeat playback is also canceled by pressing the STOP button, or setting the AM/FM/PH/CD switch the to the AM,
FM or PH position
PROGRAMMED PLAYBACK
The CD player in this unit has a 20 - track programmable memory that allows you to program the disc to playback songs
in any desired order.
1.
While in STOP mode of CD playback, press the PROGRAM button; "0" will appear in the display and the program
LED indicator will blink.
2.
Select the first track to be programmed using the SKIP REV or SKIP FWD button.
3.
Press the PROGRAM button again to confirm it, when the desired track appears in the display. Repeats steps 2 and
3 to program up to 20 tracks. You may program the same track more than once.
4.
Press the PLAY/PAUSE button to begin programmed playback; the program LED indicator will blink. Player will
begin with the first track you programmed and will continue until the last programmed track has played.
5.
Press the SKIP REV or SKIP FW button to select a specific track in the programmed tracks. After the last track has
played, the player will stop. However, the program sequence remains in the memory. The program indicator will
turn off.
6.
To repeat the programmed sequence, press the PROGRAM button and then press the PLAY/PAUSE button. The
programmed sequence may be cancelled by pressing the STOP button while in stop mode.
Notes:
•
Programming is the ability to pre-select the order in which a series of tracks will be played
•
The CD player will stop after all programmed tracks have been played or the STOP button is pressed
•
"--" and the program indicator will blink when you have programmed 20 tracks
•
During PROGRAMMED playback, press REPEAT button twice to activate repeat all feature. The REPEAT inidcator
will light and all tracks in your programmed sequence will be repeated continuously. To cancel programmed
repeat playback press the STOP button until both the program and repeat LED indicator go out
All manuals and user guides at all-guides.com
OPERATION
- 10 -
Publicité
Chapitres
Table des Matières
