Hans Dinslage Sanitas SHC 30 Mode D'emploi page 13

Note
After switching on the unit for the first time, a
light odour develops for the first minutes. This
is normal and not hazardous to your health. Let
the unit run for three to five minutes. Then you
can use the unit normally.
• If the unit becomes overheated, it switches off
automatically for your safety.
• Remove the plug from the socket and let the
unit cool down.
• Before switching the unit on again, check the
air outlet [2] and the filter [3] for blockage (e.g.
sucked-in lint, dust, hair).
• Switch on the hair dryer using the toggle
switch [6]:
Strong airflow
Gentle airflow
• Select the heat level:
High temperature
Medium temperature
Low temperature
• Dry and/or style your hair as you wish.
After each use/at each break, always switch
off the hair dryer at the toggle switch [6]
(setting 0).
The hair dryer has two functions that you can
select via the toggle switch and the cold air
button.
Function Description
Normal drying:
Drying the hair at different tem-
perature settings that you can set
using the toggle switch for heat
settings [6].
All manuals and user guides at all-guides.com
Accessories
The following attachments are provided:
• Concentrator nozzle [1]: allows you to style
After use
• Remove the plug from the socket after each
• Let the unit cool down.
• Do not wind the mains cable around the unit!
• Store the unit in a dry place that is out of
• The unit can be hung on a hook by the han-
13
Cold air:
The cold level offers the perfect
styling finish. It cools down your
hair and holds it in place for a
better result.
You can enable the cold level at
any time by holding down the
button. As soon as you release
the button, the previously selec-
ted heat level returns.
and shape your hair exactly how you want it.
use.
reach of children.
ging eyelet [7].