Kichler 45390 Guide Rapide

CAUTION – RISK OF SHOCK –
Disconnect Power at the main circuit breaker panel or main fuse
box before starting and during the installation.
1) Attach mounting strap to outlet box. Mounting strap can be
adjusted to suit position of fixture.
2) Make wire connections. Reference chart below for correct
connections and wire accordingly.
Connect Black or
Red Supply Wire to:
Black
*Parallel cord (round & smooth)
Clear, Brown, Gold or Black
without tracer
Insulated wire (other than green)
with copper conductor
*Note: When parallel wires (SPT I & SPT II)
are used. The neutral wire is square shaped
or ridged and the other wire will be round in
shape or smooth (see illus.)
SOCKET
Date Issued: 06/10/16
Connect
White Supply Wire to:
White
*Parallel cord (square & ridged)
Clear, Brown, Gold or Black
with tracer
Insulated wire (other than green)
with silver conductor
Neutral Wire
GLASS
We're here to help
For Assembling and Installing Fixtures in Canada
Pour L'assemblage et L'installation Au Canada
3) Push fixture to wall, carefully passing tabs on top and bot-
tom of mounting strap inside fixture.
4) Align holes on top and bottom of fixture with holes in tabs
on mounting strap.
5) Attach fixture to mounting strap with screws.
6) Slip glass over sockets and secure in place using socket
ring(s).
SCREW(S)
SOCKET RING
866-558-5706
Hrs: M-F 9am to 5pm EST
INSTRUCTIONS
MOUNTING STRAP
TAB
IS-45390-CB