Vacuum Cleaning - Fakir Premium S 350 Mode D'emploi

GB
Vacuum-cleaning
LED-Display [23]
-----------------------------------
☼○○○○
= Stand by
●○○○○
= MIN
●●●○○
= ECO
●●●●●
= MAX
22 23
25
42
Bedienung Bedienung Operation
Ensure before use that all filters and the dust bag are cor-
rectly inserted and are not damaged. The excellent filter ef-
fect, particularly important for allergic persons, is achieved
only with intact, correctly employed filters.
WARNING!
Check the device and the power cable before every use. A
damaged device means risk of injury and must not be em-
ployed.
● Place on the required nozzle.
● Pull the mains cable out with the plug to any arbitrary
length and plug it into a power outlet.
> The small MIN-LED in the display [23] flashes
= Stand-by-stage
Operator panel with innovative convenience:
Sensor-touch operating elements, in order to operate the
S 350 contact-free with the hand or foot.
● Switch ON [25]
> The first three LED's in the display [23] light up
= ECO stage
● Switch OFF [25]
> The small MIN-LED in the display [23] flashes
= Stand-by stage
● Increase the suction force with the Plus field [24]
● Reduce the suction force with the Minus field [22]
24
> According to the suction force which is set-adjusted,
one (MIN) to five (MAX) LED's light up in the display [23].
NOTICE!
If the device is switched off for a break, with switching on
again it starts automatically with the last set-adjusted sucti-
on force (memory function).