Cleaning And Care - Klarstein METROBREEZE 9 PARIS Mode D'emploi

EN
32

CLEANING AND CARE

Drainage Instructions
Manual drainage
1. When the machine stops after the water
is full, turn off the
unplug the power plug.Stellen Sie den
Wassertank unter den seitlichen Ablauf.
2. Place the water container below the side
water outlet behind the body.
3. Unscrew the drainage cover and unplug the
water plug, the water will automatically fl ow
into the water container. Keep the drainage
cover and the water plug properly.
4. During drainage, the body can be tilted
slightly backwards.
5. When the water is discharged, stuff the water
plug, and tighten the drainage cover.
Note: Please move the machine carefully, so as not to spill the water in the water
pan at the bottom of the body. Restart the machine after the water plug and
drainage cover are installed, otherwise condensate water of the machine will fl ow
to the fl oor or the carpet.
Continuous drainage (only applicable to
cooling and dehumidifi cation mode)
1. Unscrew the drainage cover, and unplug
the water plug.
2. Set the drainage pipe into the water
outlet.
3. Connect the drainage pipe to the bucket.
Clean the surface
Clean with surface of machine with a wet soft
cloth. Don't use chemicals, such as benzene,
alcohol, gasoline, etc. Otherwise, the surface
of the air conditioning will be damaged or
even the whole machine will be damaged.
machine power and