Connected Devices; Operating Environment - Renkforce 2368679 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Operating Instructions
2-in-1 Headset with 3.5 mm Plug & USB In-Line
Control
Item no: 2368679
1 Intended use
The product is a wired stereo headset with microphone.
The product can connect directly via 3.5 mm jack or through a USB-A adaptor with in-line
controls.
Examples of use include online chats, conference calls, and gaming.
If you use the product for purposes other than those described, the product may be dam-
aged.
Improper use can result in short circuits, fires, or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product
available to third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.
2 Delivery contents
Headset
USB-A adaptor with in-line controls
Operating instructions
3 Latest product information
Download the latest product information at
code shown. Follow the instructions on the website.
4 Description of symbols
The symbol with the exclamation mark in the triangle is used to indicate important
information in this document. Always read this information carefully.
To prevent possible hearing damage, do not listen to high volume levels for long
periods.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
5.1 General
The product is not a toy. Keep it out of the reach of children and pets.
Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
If you have questions which remain unanswered by this information product, contact our
technical support service or other technical personnel.
5.2 Handling
If it is no longer possible to operate the product safely, take it out of operation and pro-
tect it from any accidental use. Safe operation can no longer be guaranteed if the
product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
Consult an expert when in doubt about the operation, safety or connection of the appli-
ance.

5.3 Operating environment

Do not place the product under any mechanical stress.
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam
and solvents.
Protect the product from high humidity and moisture.
Protect the product from direct sunlight.
www.conrad.com/downloads
or scan the QR

5.4 Connected devices

Also observe the safety and operating instructions of any other devices which are con-
nected to the product.
6 Product overview
To prevent possible hearing damage, do not listen to high volume levels for long
periods.
1
2
1
Adjustable headband
3
3.5 mm AUX jack
5
Volume: increase (+) / decrease (-)
7
Status indicator
7 Connection
Notes:
– The product is plug and play.
– Refer to the "Troubleshooting" section if it does not function correctly.
7.1 3.5 mm AUX
Use the 3.5 mm AUX connection when connecting to a mobile device.
The microphone will be available for use when making calls.
7.2 USB-A
Use the USB-A adaptor with in-line controls when connecting to a computer.
8 Operation
Icon
Name
Mute: Sound
Volume up
Volume down
Mute: Microphone
9 Troubleshooting
Problem
Suggested solution
Microphone / headphones not
working.
Microphone and speaker have
screeching sound and/or echo.
When connected to a computer
via USB-A:
3
4
5
6
2
Microphone
4
Mute: sound
6
Mute: microphone
8
USB-A connector
Function
Press to mute / unmute the sound.
Press to increase the volume.
Press to decrease the volume.
Press to mute / unmute the microphone.
The status indicator will light red when muted.
Check mute is OFF.
Check the cable/cable to device connections.
Lower the volume.
Move microphone further away from the mouth.
Check the computer microphone is not too close to
the headset.
Try a different USB port on the computer.
Disconnect the product, restart the computer, recon-
nect.
8
7
3

Publicité

Table des Matières
loading

Table des Matières