Publicité
Les langues disponibles
Les langues disponibles
Replacing Bulb:
1. Switch off the extractor hood and isolate the extractor
hood by pulling out the mains plug or switching off the fuse.
2. Remove the grease filter.
3.
.Replace the lamp(commercially available filament
lamps (max.40watts) or halogen lamp (max.28watts),E14
lampholder).
4. Reconnect the power by inserting the mains plug or by
switching on the fuse.
Information
Clean ventilation fans frequently. Grease should not be allowed
to accumulate on fan or filter.
Cleaning Instruction
Disconnect range hood from power supply before cleaning
or servicing.
1. Cleaning the surface of hood frequently. Use mild soap or
detergent to clean the hood.
2. Do not use harsh alkalis or abrasives.
3. Avoid the use of scouring powders or dishwasher com-
pounds.
4. Grease filter may be washed using mild soap or deter-
gent. In normal operation (1 to 2 hours daily), the Grease
filter must be cleaned after 2 months. (Heavy grease
build-up may not be cleaned easily and the filter may
require replacement)
5. Charcoal filter cannot be cleaned. Depending on the
frequency of use and the type of cooking, the expected
life of Charcoal filter is from 1 to 6 month. Replacement is
required.
Information
When cleaning water must not enter into motor, control switch
or other electrical parts.
10
V.6
Publicité
Chapitres
