EAS ELECTRIC EMRH60TX Guide D'utilisation page 20

Method 1
1. According to the figure, make
sure of the position of hood in the
cabinet. The wood strips should be
lined up with the 4 keyholes slots
on the top of the range hood. On
the cabinet,
(supplied) according to the relative
position of 4 key holes on the
bottom of hood. The extent of
screwing should be convenient to
the next installation.
2. Hang the hood and let its
4 key holes aim at screws,
the 4 screws should be in the
narrow parts of key holes.
Screws should be fastened
firmly, make sure that the
installation
hood and cabinet is well
fastened.
3. Install screws
security holes, in case of
front and back moving of
hood, so that the using is
safer.
Information
When cutting or drilling into wall or ceiling, do not damage
electrical wiring or other hidden utilities.
install 4
between the
in the
screws
88
240
Security hole
595
6
480
423
Ø118
135
28
175
40
280
V.6