Battery Connection - Hotline Harrier 47HLB150 Guide D'installation Et Garantie

Connecting it all together
The energiser can be operated from a 6 or 12v battery. 6v (47P44) batteries fit into the
battery box for easy portability. Standard size leisure batteries are run from outside of the
battery box.

Battery connection

Unscrew the thumb screws and remove the
energiser top from the battery box.
6v internal battery connection
If not already inserted, clip the 9v lead into the
connector in the base of the energiser top.
10
Place the 6v battery into the battery box of
the energiser and slot the connectors of the
6v lead into the corresponding connectors on
the battery.
6v
Replace the energiser
top and re secure with
the thumb screws.
ENG.indd 2
7
12v battery connection (external)
If not already inserted, clip the 12v lead into
the connector in the base of the energiser
top.
11
Position the lead through the slot in the
battery box and replace the energiser top,
securing with the thumb screws.
11
18/02/2019 11:05:52