Technical Information - GEV CGF 9868 Mode D'emploi

Carillon sans fil

Masquer les pouces

Table des Matières

Les langues disponibles

Wireless door chime CGF 9868

Includes

1x Ringer switch for RF door gong Fig. A

1x RF door gong with

visual ringer display Fig. B

By purchasing this item, you have chosen

a high-quality GEV product. Please read

these operating instructions carefully to

ensure correct operation and keep them

in a safe place so that you can refer back

to them if necessary. Use this product only

as intended (as described in the operating

instructions). Do not alter, modify or paint

the device, as this will result in loss of

warranty.

Functionality

This model features over 52 configurable

melodies and acoustic signals. The ringer

volume can be set to four different levels

(minimum of approx. 20 dB; maximum of

approx. 85 dB). In addition to the audible

signal, the ring is also indicated via an

integrated LED. One radio doorbell can be

controlled via several ringer buttons, such as a

ringer for the front door and ringer for the rear

door, meaning that each ringer button can be

assigned a specific melody.

Selecting the mounting location

As both components are battery-operated,

the CGF 9868 radio doorbell offers great

flexibility in terms of where it is positioned.

Both components can be positioned exactly

where you want them. As an option, the bell

can be mounted on a wall using the two

recesses provided for this purpose on the

rear of the component. Before starting the

mounting process, check the radio range by

commissioning the components in advance

(refer to the section entitled "Inserting the

battery/commissioning"). The range in the

open air is approx. 200 m but will be lower

in buildings and in connection with other

on-site factors. The bell must not come into

contact with water and is designed for use in

enclosed spaces.The ergonomically shaped

ringer button can be mounted on a clean and

flat surface using the double-sided adhesive

tape provided (Fig. F). Mounting the doorbell

components on a metallic surface may impair

the transmitted signal. Do not expose the

receiver directly to rain or dripping water.

Inserting the battery/commissioning

Before commissioning, insert the batteries

provided into both components, ensuring that

the polarity is correct. To insert the batteries,

use a suitable tool to lift up the ringer button

and insert the 12-V battery provided (Fig. D).

Close the cover again. Open the battery

compartment cover on the bell and insert the

three 1.5-V AAA batteries provided (Fig. E).

Close the cover again. The radio doorbell and

ringer button must be paired with each other

once before use. First, select your preferred

ringer signal using the melody selection button

1x Double-sided adhesive tape

1x 12 V Battery

3x 1,5 AAA Batterys

(Fig. B2) and your preferred volume (Fig. B1):

Press and hold the ringer button (Fig. A1) and

the volume control and melody button on the

bell at the same time (Fig. B1/B2) for around

five seconds. Test whether the pairing process

was

successful.

unsuccessful,

the pairing process. Once the components

have been paired, you can change the

melodies at any time without having to pair

the components again. If required, you can

delete the settings by pressing and holding

the melody button for around five seconds

(Fig. B2). To additionally register one or more

bell button (sold separately as an accessory),

repeat the instructions above.

Battery and rechargeable battery

information

Do not dispose of used batteries

with unsorted household waste. You

are required by law to return all used

batteries. These can be returned free-of-

charge to the place of sale. Batteries contain

substances that are harmful to the environment

and to human health and must therefore be

disposed of properly.

Recycling instructions

Do not dispose of this device with

unsorted household waste. Owners

of old devices are required by law to

dispose of this device properly. Contact

your town council for further information.