RealFlame 2609-O Manuel D'instruction page 5

Repeat step four with the remaining logs. Use figure 5 as reference for placing the logs.
After all logs have been fastened to the Lift Assembly slowly lower the lift arm. If the
top four logs do not rest on the Front Log (5) you may need to adjust the position of
the Rear Log (6) to the left or right.
Place assembled unit in your existing fireplace. Add decorative lava rock around the base
of your fireplace (optional).
Step Six
Figure 6
Using Your Log Set
With assembled unit in fireplace, raise lift
assembly. Place up to three cans of Real
Flame® Ventless Fireplace fuel cans in the
fuel tray located in the middle of the grate.
With an extended lighter or long match
light fuel. Carefully lower lift handle.
During the initial burn you may experience
a slight odor. This odor is temporary and
will be absent on following burns.
All manuals and user guides at all-guides.com
6
2
1
Step Five
4
3
5
Figure 5
Figure 5
Figure 6