Harman JBL On Stage IV Manuel D'utilisation page 6

5. Connect a USB Type Mini-B cable (not included) to the
USB port and to a USB port on the computer on which your iTunes is located.
6. If you are going to use your
one end of a 3.5mm stereo cable (not included) into the Audio In connector,
and plug the other end into the audio source's audio out or headphone out
connector.
6
0217CSK - JBL On Stage IV OM R2.indb 6
All manuals and user guides at all-guides.com
JBL On Stage IV's
USB Type Mini-B
JBL On Stage IV with another audio source, plug
3.5mm
iMpOrtant: if you play audio through a docked ipod/iphone and
an audio source connected to the audio in connection at the same
time, you will hear both of their outputs mixed through the jBl
On stage iV. to hear only one source you will need to manually
turn off the source you do not want to hear.
7. Insert the included AC outlet adapter all the way into the power supply (if
there is more than one adapter, use the correct one for your region). Then
connect the power supply into the JBL On Stage IV's 6V DC In connector and
plug it into an AC wall outlet.
1. 2.
20/07/10 14:45:57