Initial Start-Up; Ports; Establishing The Power Supply - Caratec Vision CAV192LT Notice D'utilisation

3. Initial start-up

3.1. Ports

External appliances or sources can be very easily connected
to your TV set.
The connections are located on the back side of the
appliance.
Port
DC 12V IN
PC AUDIO
SCART
MINI YPbPr
EARPHONE
HDMI
RF
USB
CI
COAXIAL
VIDEO
AUDIO R
AUDIO L
It is possible to connect passive as well as active antennas (with integrated booster) to the
antenna input.

3.2. Establishing the power supply

You have the following possibilities of supplying your Caratec TV set with power:
1. Connecting the set to the vehicle's on-board power supply (12-24VDC). If you use a cable
which is longer than 5 m, you must use a cable with a cross section of at least 2 x 2.5 mm².
-
Positive polarity:
2. Connecting to the cigarette-lighter (12-24VDC).
3. Connecting to a 230V power plug using the mains adapter supplied with the TV set
(230VAC/12VDC).
Switch on the set's main switch on the rear side after connecting to the power supply.
32
All manuals and user guides at all-guides.com
Explanation
Connection power cable / power supply
Audio connection PC
A/V input for external source
RGB video input
Headphone output
A/V input for external source, digital
TV antenna connection
USB connection for showing / playing picture / music / video files display
CI slot for receiving coded stations
Digital audio output
Video input for external source
Audio input for external source, right side
Audio input for external source, left side
+