Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
e n g l i s h
Thank
you very much for choosing Cabasse speakers.
Please read carefully these instructions before setting up your speakers.
SAFET Y INSTRUCTIONS
Explanation of
symbols -
angle, is intended to alert you to
the presence of uninsulated
"dangerous voltage" within the product's enclosure that may
be of sufficient magnitude to constitute a risk of electric shock
to persons.
The exclamation point within an equilateral triangle is
intended to alert you to the presence of important ope-
rating and maintenance (servicing) instructions in the literatu-
re accompanying the appliance.
Instructions -
Carefully read through all the safety and
operating instructions before switching on any device for the
first time.
Keep these instructions in mind -
stantly referred to through this manual.
Pay special care to warnings -
the product or warning notes in the user's manual must be
followed.
Follow the instructions -
lation and operation instructions.
Cleaning -
Always take off the power cord before cleaning
the device. Do not use cleaning solvent, whether liquid or air
spray. Using a soft damp cloth is recommended.
Accessories -
To avoid incidents, only use accessories express-
ly recommended by Cabasse.
Water and moisture -
The
damp or wet locations, such as humid basements, next to a
bathtub, sink, swimming pool or any other similar conditions.
Carts and Stands -
used only with a cart or stand that is recommended
by the manufacturer.
>
Portable cart warning
Installation on a piece of furniture and stands -
Do not place this
device on an unsteady surface, i.e. a stand,
tripod, table, shelf, etc. It may fall and cause serious injury to
a nearby child or adult.
Ventilation outlets -
The
position that restrains the operation of its fans. Avoid installing
the device on a bed, couch, blanket or other similar surfaces
that may prevent the appropriate air flow. Do not install the
device in a confined space, such as a book shelf or other piece
of furniture, that could prevent sufficient air from flowing
freely.
Power -
The
device shall only be connected to a source of
power compliant to the one described in this manual or on rel-
evant printed labels on the product. If you are not sure of the
type of power available, please contact your reseller or the
local power company.
Power cords -
The power cords must be laid out in such a
way that they cannot be walked on, pinched, bent under
other devices. Also pay special attention to the matching of the
plugs and the connection of the cord to the device.
graphical
The lightning
flash
with arrowhead symbol,
within an equilateral tri-
They will be
con-
All the warning labels on
Follow carefully all the instal-
product shall not be used in
The
appliance should be
device shall not be placed in a
Lightning -
For better protection against lightning or if the
device must remain unused for long stretches of time, unplug
the power cord and antenna jack. This minimizes potential
damages due to lightning or line surges.
Overloads -
Avoid overloading the power plugs,
cords or power relays. This could result in fire or electric shocks.
Foreign bodies and liquids -
rials or liquids enter the device. They could cause fire or elec-
tric shocks. Never spill any liquid on the device.
Maintenance -
Users must never attempt to maintain the
device on their own, except for those maintenance operations
described in this manual. Any task beyond regular user main-
tenance must be performed by qualified service operators.
Troubleshooting -
You must unplug your device from the
power supply and have it checked by a qualified technician if:
■
The power
supply or the plug is damaged.
Foreign bodies or liquid penetrated the device.
■
The
device was exposed to dripping or splashing.
■
The
device does not seem to work correctly under normal
■
operating conditions. Only operate the controls described in
this manual. Any other operation could damage the device
and require on-site visit of a qualified technician.
The
device has fallen or its housing is damaged.
■
The
performances of the device are strongly altered.
■
Spare
parts -
If
spare parts are needed to repair the device,
make sure that the technician followed the manufacturer's
recommendations or that the replacing parts feature the same
specifications as the original ones. Non-compliant parts can
result in multiple damages, including fire or electric shocks.
Checks -
After any servicing of the device, ask the techni-
cian to perform appropriate testing to make sure that the
device works safely.
Exposure to high
temperatures -
be kept away from heating sources, such as radiators, heaters,
amplifiers or any other similar item likely to make the operat-
ing temperature rise excessively.
Applicable for USA, Canada or where approved for usage
Caution !
To prevent electric shock, match wide blade plug to wide
slot, insert fully.
1
UNPACKING
After opening the top carton flaps, remove the grille. Then
fold the carton flaps right back and invert the carton contents.
Lift the carton clear of the contents and remove the inner pac-
kaging from the speakers. We suggest you to retain the packing
for future use.
POSITIONING
Speakers positioning
Our
speakers have been designed to function in a vertical posi-
tion. Under these conditions, the polar response is most uni-
form.
The majority of our models are delivered with a set of decou-
2
pling spikes or cones
, these accessories
the inserts under the cabinets. These accessories ensure the
stability of the speaker while limiting resonance coming from
certain types of grounds like wood floors.
extension
Avoid letting
foreign mate-
The
device should
are to be screwed in
Publicité
Table des Matières
