Seca 757 Mode D'emploi Et Garantie page 15

Connecting the mains unit
The scale is powered by a mains unit and by rechargeable batteries. The connection
socket for the mains unit is in the base of the scale.
Please use only the mains unit supplied or mains units from the seca range of
accessories. Before plugging the unit into the socket, check whether the mains
voltage marked on the mains unit matches local mains voltage.
– Turn over the scale so that the base-
plate faces upwards.
– Plug the latching plug of the mains unit
into the connection socket in the base
of the scale.
– Then turn the scale the right way up.
– Connect the mains unit to a power
socket.
Connecting the rechargeable battery pack
Note:
to weigh independently of the mains, the set of storage batteries must be installed an
charged for 24 hours before the first use by plugging the power pack into the scales.
– Carefully turn over the scale so that the
base of the scale is accessible.
– Push the battery compartment closure
towards "Battery" and open the cover.
– Connect the plug contacts to the re-
chargeable battery pack located in the
battery compartment.
– Close the cover and then turn the scale
back up the right way.
Model 757
scale from
underneath
plug-in
mains unit
15
GB