Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Switch off the car engine.
4
1. Clean and degrease the spot where you want to fix the product.
Place the product just behind or below the rearview mirror.
4
2. Place suction fix A
3. Use the suction fix clip A
4. Insert a microSD card (not included) into the microSD card slot A
5. Adjust the position of the lens A
Ensure the product and the power cable are installed and do not interfere
4
with the sight of the driver or impede with the operation of any driving
controls.
Always focus your attention on the road.
4
Connecting the product to the power supply
Option 1:
1. Plug the auxiliary power plug A
2. Plug the other end of A
Option 2:
1. Charge the product using the USB port A
While charging a red LED lights up, when fully charged the light is off.
4
The product automatically switches on and starts recording when you switch
4
on your car engine.
The camera switches off 5 seconds after the engine is off.
4
Using the product
Menu
1. Press menu A
5
2. Press A
or A
4
3. Press OK A
10
4. Press A
5
to exit the menu.
Press A
to toggle between video mode, photo mode and playback mode.
12
Video mode
1. Press A
12
2. Press A
10
to start or stop recording.
The indicator LED will blink blue.
4
The product automatically saves recordings on the SD card.
4
8
on the windshield.
7
to fix the product to the windshield.
15
into an auxiliary power outlet.
to enter the setup menu interface.
6
to navigate through the menu.
to confirm a selection.
to enter the video mode.
3
for optimal view of the road.
into the mini USB port A
15
1
.
8
2
.
1
.
Publicité
Table des Matières
