Sherwood S9 Guide D'utilisation page 26

S9/S7 3D Sound Soundbar
HDmI
Symptom
No picture or sound.
No picture.
No sound, or sound
suddenly ceases.
Important Information Regarding the HDmI Connection
Some HDMI signals cannot be routed through this system. (This depends on the HDMI-equipped
component you are connecting. Check with the manufacturer for HDMI compatibility information.)
If you cannot receive HDMI signals properly through this system (from your component), please try
the following configuration when connecting up.
26
If the problem still persists when connecting your HDMI component directly
•
to your monitor, consult the component or monitor manual or contact the
manufacturer for support.
Depending on the output settings of the source component, the video
•
format may not be displayed. Change the output settings of the source,
or connect your source component directly to TV using the component or
composite video jacks.
• This system is HDCP-compatible. Check that the components you are
connecting are also HDCP-compatible. If they are not, please connect your
source component directly to TV using the component or composite video
jacks.
Some source components will not work with this system (even if it is
•
HDCP-compatible). In this case, connect your source component directly
to TV using the component or composite video jacks.
If video images do not appear on your TV or flat screen TV, try adjusting
•
the resolution, DeepColor or other setting for your component.
• To output signals in DeepColor, use an HDMI cable (High Speed HDMITM
Cable) to connect this system to a component or TV with the DeepColor
feature.
• If you've made separate connections for audio, make sure you have
assigned the analog/digital jack(s) to the corresponding HDMI input for the
component.
• Check the audio output settings of the source component.
If the component is a DVI device, use a separate connection for the audio.
•
Remedy