Binzel CAT3 Mode D'emploi page 36

6 Putting into operation
6.3 Connecting the helix cable
1
6
1 Cable assembly
2 Flange plug
Fig. 9 Connecting the helix cable
1 Plug the helix cable (4) into the connector housing (6) using the angled male connector (5).
2 Plug the flange plug (2) into the torch (3) and the cable assembly (1).
3 Lock both connectors to prevent their accidental disconnection.
For the switching function please see the functional diagram.
 Fig. 6 Functional diagram (View from PINs side of the connector) on page EN-13
EN - 16
2
3 Torch
4 Helix cable
3
5 4
5 Angled male connector
6 CAT3 connector housing
BAL.0324.0 • 2018-06-13
CAT3