Publicité
PLAYING TRACKS
•When your device is connected. You can quickly tap the PAIR (1) button to play/pause the
currently selected track. The led will briefly blink red/blue
•When there is a track playing, you can double tap the pair button to skip to the next track.
AUX IN (6)
•Use the provided 1/8" aux cable to connect your device to your AUX IN input.
CHARGING YOUR DEVICE (7)
•You can use your LANEY SOUND SYSTEMS F67 player straight out of the box, but it is
recommended that you give it a full 8 hours charge before you use it the first time in order to
get optimum battery life.
•You can also use the LANEY SOUND SYSTEMS F67 as a powerbank to charge your device
using the USB port.
CHARGING YOUR BLUETOOTH SPEAKER
•The power led defaults to blue when powered on and using the internal battery. The led will
start flashing as the battery runs low to indicate it should be charged soon. The led flashes
progressively slower as the battery is nearing exhaustion and should be charged.
To charge while not using the speaker. Make sure the power switch is set to off, then
•
insert the included 12V power supply into the charging socket (10) on the rear of
the unit. The led changes to a constant red colour while charging. When charging is
complete (around four hours) the led will go off.
To charge while using the speaker. Make sure the power switch is set to on, then
•
insert the included 12V power supply into the charging socket (10) on the rear of the
unit. The led changes to a constant purple colour while charging. When charging is
complete (around four-five hours, depending on speaker volume) the led will change
to Blue. Note, if the power led is flashing while plugged in, it is not in charge mode.
Make sure the unit was turned on prior to plugging the PSU in.
4
USER MANUAL
www.laney.co.uk
Publicité
