Publicité
OPERATION
POWERING ON
•Turn volume (3) down.
•Throw the power switch (9).
•Press the PAIR (1) button – follow the instructions detailed below.
•Connect to LANEY SOUND SYSTEMS on your device.
•Play Music.
PAIRING
•If the blue pair led is not illuminated then no device is connected to the
LANEY SOUND SYSTEMS F67.
•In order to pair your device, follow the procedure detailed below.
•Press and hold the pair button (1) until the blue LED starts to flash slowly.
•Pairing mode times out after one minute.
•On your device search for LANEY SOUND SYSTEMS and connect. The led will change to
continuous blue when connected.
•Note, you cannot start a new pairing request whilst a device is already connected,
you must first disconnect the first device and then start pairing.
•The LANEY SOUND SYSTEMS F67 allows multiple devices to connect to it. If you have
previously connected, it should accept a connection request.
•If you start playing a song, it will take over from the currently connected device.
The pair led will change to an intermittent blue flash when multiple devices are
connected.
•Pressing and holding the pair button for 10 seconds forces the LANEY SOUND SYSTEMS F67
to forget all the devices currently connected.
3
USER MANUAL
www.laney.co.uk
Publicité
