Electrical Safety; Battery Safety - Camlink CL-STUDIO30 Manuel De L'utilisateur

CL-STUDIO30 - Studio flash light
Safety
General safety
• Read the manual carefully before use. Keep the manual for future reference.
• Only use the device for its intended purposes. Do not use the device for other purposes than described in the
manual.
• Do not use the device if any part is damaged or defective. If the device is damaged or defective, replace the device
immediately.
• Do not expose the product to water or moisture.
• Do not block the ventilation openings.

Electrical safety

• To reduce risk of electric shock, this product should only be opened by an authorized technician when service is
required.
• Disconnect the product from the mains and other equipment if a problem should occur.

Battery safety

• Use only the batteries mentioned in the manual.
• Do not use old and new batteries together.
• Do not use batteries of different types or brands.
• Do not install batteries in reverse polarity.
• Do not short-circuit or disassemble the batteries.
• Do not expose the batteries to water.
• Do not expose the batteries to fire or excessive heat.
• Batteries are prone to leakage when fully discharged. To avoid damage to the product, remove the batteries when
leaving the product unattended for longer periods of time.
• If liquid from the batteries comes into contact with skin or clothing, immediately rinse with fresh water.
Description
The studio flash light was designed to provide optimum lighting for your location and studio photography purposes.
1. Control panel
2. Remote sensor
3. Lamp
4. Flash tube
5. Adjusting knob (flash light)
6. Ventilation openings
7. Softbox mount
8. Latch (softbox mount)
9. Tripod mount
10. Locking knob (tripod)
11. Umbrella mount
12. Locking knob (umbrella)
All manuals and user guides at all-guides.com
5
8 6 2
4
3
7
12
11
5
10
9
English
1