Temperature Indicator; Coolmatic Function; Quick Chill Function - Electrolux SANTO 72398-6KA Notice D'utilisation

6 Control panel
The set temperature will be reached within 24 hours.
After a long period out of use it is not necessary to set again the temperature because it
remains stored.
A medium setting is generally the most suitable.
The exact setting should be chosen keeping in mind that the temperature inside the ap-
pliance depends on:
• room temperature
• how often the door is opened
• the quantity of food stored
• the location of the appliance.
If the ambient temperature is high or the appliance is fully loaded, and the appliance is
set to the lowest temperatures, it may run continuously causing frost to form on the
rear wall. In this case the Temperature regulator must be set to a higher temperature to
allow automatic defrosting and therefore reduced energy consumption.

Temperature indicator

The temperature indicator shows the fridge temperature currently set .

COOLMATIC function

The maximum performance is obtained by setting the COOLMATIC function. It's recom-
mended when loading large quantities of food.
1. Press the COOLMATIC button.
2. The COOLMATIC light will light up.
The internal temperature goes down to +2°C.
After about 6 hours the COOLMATIC function switches off automatically.
It is possible to deactivate the function at any time by pressing the COOLMATIC button.

Quick Chill function

The Quick Chill function provide rapid cooling of
cans and bottles through cold airstream.
1. Put the cans/bottles on the Quick Chill bottle
holder.
2. Open the air lever (1) towards maximum.
3. Activate COOLMATIC function.
4. The Quick Chill function stops automatically
after approximately 6 hours.
5. When the cooling is finished return the air
lever (1) towards minimum.
To cancel the function at any time, press COOL-
MATIC button.
The Quick Chill bottle holder can be removed if
not used.
All manuals and user guides at all-guides.com
1