ampridge MightyMic Pro AM3.7170BATT Manuel D'installation page 5

Using the MightyMic Pro for audio recording
The MightyMic Pro will support audio App's designed to work with external Bluetooth
devices.
An audio App is needed such as the MightyMic Pro Recording App (IOS) to do Bluetooth
audio recording. Please check our website for updates regarding this or other supported
Apps.
Using the MightyMic Pro for video recording
1) Connect the Bluetooth microphone before the app starts. You may need to select the
Bluetooth mic as an option in the settings of the App
2) With some Apps, if the Bluetooth microphone is connected after the app starts, the
Bluetooth microphone will start automatically and the microphone symbol may turn blue
to indicate a Bluetooth Microphone is active
3) If the Bluetooth Microphone is disconnected while the app is active, the app switches
back to the built-in microphone.
4) To confirm the microphone is connected do a test recording or go into the Settings
section. Upon leaving the Settings section the Bluetooth microphone normally will
become active again.
5) A video App is needed such as FilmicPro or MoviePro (IOS) or Cinema FV-5 (Android)
to do Bluetooth video recording. Please check our website for updates regarding this or
other supported Apps.
6) You may hear an audio delay while monitoring the recording. This is normal. This delay
will not occur on the recording
LED Indicators
LED Status
Power On
Power Off
Pairing
Unconnected
Standby Mode
Connected Standby Mode
Connected Working Mode
Multi Point Connection
Low Battery Power
Charging
Fully Charged
MightyMic Pro User Manual
LED Indication
The Blue LED will flash twice when connected
The Blue LED will flash once then the Red LED will flash once
The Red and Blue LED's will flash alternately
The Blue LED will flash once every second
The Blue LED will flash twice every 3 seconds
The Blue LED will stay ON continuously
The Blue LED will flash once every 5 seconds
The Blue LED will stay ON continuously. The LED may flash
differently depending on the type of phone
The Red LED will flash 3 times quickly
The Red LED will stay ON continuously
The Red LED will turn OFF
4