Hardware Overview; Front View - D-Link mydlink Wi-Fi Smart Plug DSP-W110 Guide D'installation Rapide

ON/OFF Button
& Power LED
Outlet
WPS
Reset
ON/OFF Button
Status LED
Power LED
Outlet

Hardware Overview

Front View

Blinking Green
Solid Red
Press to turn the device connected to the DSP-W110 ON or OFF.
Solid Green
Blinking Green
Blinking Orange
Solid Red
Off
Solid Green
Off
Connect your appliances, lamps, and other electronic devices you
wish to control.
Press for one second to start the WPS
connection process. The Status LED will start
to blink green.
Press and hold until the Status LED turns red
in order to reset the device back to the factory
default settings (for about 10
The Smart Plug is successfully connected to
your network.
The WPS process is in progress.
The Smart Plug is not properly connected to
your wireless network.
The Smart Plug is powering on, attempting to
reset, or the device is defective.
If the Smart Plug will not power on, try
plugging the Smart Plug into another outlet.
The electronic device you plugged into your
Smart Plug is powered on.
The device you plugged into your Smart Plug
is turned off or not receiving power.
4
Status LED
WPS Button
Reset Button
seconds).