Zyxel G-220 Guide De Démarrage Rapide page 11

Troubleshooting
• If the lights on the G-220 v2 are not on after you installed the
utility and the G-220 v2, make sure the G-220 v2 is properly
inserted.
• If the icon does not display, uninstall and re-install the util-
ity. See the User's Guide for how to uninstall the utility.
• If your G-220 v2 does not connect to a wireless network,
make sure there is an available wireless network within
range (see your User's Guide for details about the site sur-
vey feature). If wireless security is enabled for that network,
you need to configure security settings in your G-220 v2 (see
the User's Guide).
Note for Windows XP Users: If you want to use WZC, either
disable the ZyXEL utility (if you already installed it) or just
install the driver.
To disable the ZyXEL utility, right-click the
Exit. To activate the ZyXEL utility again, double-click the
icon on your desktop or click Start > Programs > ZyXEL G-
220 v2 Wireless Adapter Utility > ZyXEL G-220 v2 Wireless
Adapter Utility.
To install the driver only, select Driver only.
Important Information
Federal Communications Commission (FCC) Interference
Statement
ENGLISH
11
icon and select