Polaris GLACIER II Mode D'emploi page 10

MOUNT PLATE FOR "GLACIER II" PLOW FRAME
KIT PN 2878835
LIMIT SWITCH ASSEMBLY INSTRUCTIONS
1. To remove the lower cover of the limit switch ,
insert the end of a flat screwdriver in the opening
and turn as illustrated.
3. Fasten the connector (short)  onto the limit switch
 as illustrated.
3
7515223
A-7515223 Rév. A
3
WHITE
4
BLACK
- 4-
2. Bore the lower rubber cover of the limit switch .
Insert the connector (short)  as illustrated.
4
4. Fasten the limit switch  to the pushframe using the
hex bolts , the
(2) M4-0.7 X 35 mm
, and the nylock nuts .
(2) M4-0.7
3
flat washers
(4) M4
Imprimé en Chine / Printed in China