Get Started; Bluetooth Mode - THOMSON DS60DUO Mode D'emploi

Get started

Power
CAUTION
• Risk of product damager! Make sure that the power voltage
corresponds to the voltage printed on the back label.
• Risk of electric shock! When you unplug the AC power cord
always pull the plug from the socket. Never pull the cord.
• Before connecting the AC power cord, ensure you have
completed all other connections.
Place the unit in the desired position and unravel the mains cable. Insert the cable into the supply
socket and switch on if applicable.
Auto standby
When playing media from a connected device, the Tower automatically switches to standby if:
• No button is pressed for 10 minutes,
• No audio from a connected device for 10 minutes.
Paired the twin tower.
Power on the two speakers, the speakers will automatically enters to BT mode, press the main unit
MODE/PAIR button, the tower can be automatically paired.

Bluetooth Mode

A. Pairing with a Bluetooth cell phone
Please make sure your cell phone is Bluetooth-enabled. Specific pairing steps may vary with different
cell phones. Please refer to the user manual of your cell phone for further information. The general
pairing steps are as follows:
1. Keep DS60DUO and Bluetooth cell phone within 1 meter when pairing.
button, the speakers automatically enters the Bluetooth mode
2. Press
3. Switch on your cell phone's Bluetooth function and search for Bluetooth devices. After the search
is completed, select "DS60DUO" from the Bluetooth device list.
4. According to indication, enter password or PIN No: "0000" and press "Yes" or "confirm".
5. After successful pairing, select "DS60DUO" from the Bluetooth device list and press "connect".
B. Pairing with a Bluetooth stereo transmitter
Different Bluetooth transmitters have different pairing ways. Please refer to the user manual of your
Bluetooth transmitter for further information. The general pairing steps are as follows:
1. Keep DS60DUO and Bluetooth transmitter within 1 meter when pairing.
button, the speakers automatically enters the Bluetooth mode
2. Press
3. Switch on your Bluetooth transmitter and let it enter pairing mode.
4. The transmitter will search and connect with DS60DUO automatically. After successful connecting,
the Bluetooth voice will change when connected successfully.
Remarks:
• DS60DUO will return to pairing mode automatically after disconnecting from a Bluetooth device.
C. Music Playback
Connecting with a A2DP cell phone or Bluetooth transmitter
1. Connect your cell phone or Bluetooth transmitter with DS60DUO.
2. You can listen to your music from DS60DUO now when playing it back.
3. Press Vol+ to turn up the volume, press Vol- to turn down the volume.
to skip to the previous song
4. Press
5. Press to skip to the next song
- EN 6 -