emerio IP-111233.2 Mode D'emploi page 6

IP-111233.2
PARTS DESCRIPTION
1. Air vent
2. Crystal plate
3. Control panel
4. Air entry
5. Digital display
6. Timer button (also for Preset)
7. "－" button (Down)
8. "＋" button (Up)
9. ON/OFF button
10. Rice mode
11. Soup mode
12. Milk mode
13. Water mode
14. Fry mode
15. Hot pot mode
OPERATION
1. Place the suitable cooking utensil in the center of the plate.
2. Put the plug in the socket, the appliance has a beep sound, indicators and digital display light up and
turn off, and then only the LED of "On/off" is twinkling, the appliance is awaiting the order.
3. Press the On/off switch to switch on the appliance. The display screen shows "1300", and the appliance
enters into the hot pot mode.
4. Select different modes according to your desire.
5. After use, turn off the appliance. The fan on the bottom will keep working for about 1 minute to help
the appliance cool down. After this, unplug the appliance. If you don't take the plug out, the indicator
for ON/OFF button will keep twinkling and the appliance is awaiting the order.
Note:

Only hot pot mode and Fry mode are adjustable. The rest of modes are automatic and you cannot
adjust the set power. Do not use the automatic modes for small amount of food.

In hot pot mode, you can press the " ＋ " & " － " buttons to select the power between
200-400-800-1000-1300-1600-1800-2000W.

In Fry mode, you can press the " ＋ " & " － " buttons to select the temperature between
80-100-120-160-180-200-240-270℃.

The digital display will show "2000", "800", "1600", and "1000" respectively for telling the set power
when appliance is working in water mode, milk mode, soup mode and rice mode.
TIMER/PRESET FUNCTION
Timer (3 hours) – only for hot pot mode and fry mode:
Press the Timer button and then the buttons "＋" & "－" to increase or reduce one minute at a time. Long
- 5 -
EN