Technical Specifications - SE DynaCaster Manuel De L'utilisateur

Technical Specifications

Capsule
Voice coil
Magnet
Polar Pattern
Frequency range
Sensitivity
Powering
Current consumption
Electrical impedance
Recommended load impedance
Connectivity
Dimensions
Weight
Support
In the event that you experience any problems or have any questions regarding your sE product, please
contact your dealer first for the fastest and most direct service. If authorized service is required, it will be
arranged by that dealer:
If you are still having difficulties with support or assistance, please do not hesitate to contact us directly:
http://www.seelectronics.com/contact-us
Lastly, please remember to register your new gear with sE to extend your warranty to a full three years:
http://www.seelectronics.com/registration
Frequency Response
http://www.seelectronics.com/dealers
Dynamic
Aluminum
Neodymium
Cardioid
20 Hz - 19 kHz
2.0 / 60 mV/Pa (-54 / -24 dBV)
+48V Phantom power
3.0 mA
300 / 135 Ohms
> 1k Ohms
3-pin male XLR connector
Ø 62 x 220 mm / ø 2.44 x 8.66 in.
732 g / 25.82 oz.
5
Polar Pattern