SJOEF BIS256 Manuel D'instructions page 6

See the illustrations on pages 4 and 5.
1. lnstall the handlebar in center, close the lid and tighten with a hexagon.
2. The saddle is installed on the bike and adju sted to a suitable position to
tighten the buckle.
3. Wheel install wheels, unscrew the female hook of the outer cover of the
wheel, and install the wheel on the front fork.
4. Hang the hook on the cap nut and screw it up with a wrench.
– This balance bike should be stored in a dry place.
– This balance bike should be cleaned only with a damp cloth and then
dried thoroughly. No chemical cleaners should be used as this will
damage the bike.
EN - Manual
INSTRUCTIONS
MAINTENANCE
6