Installation - Transform QL063 Manuel De L'utilisateur

Installation

INSTALLING THE CABINET FEET
- Unpack the cabinet (A) and place the sink
(B) on a blanket or cardboard to protect
the surface .
- Turn the cabinet (A) upside down onto the
protective surface .
- Attach cabinet feet (H) to the base.
- Gently rotate the cabinet upright .
INSTALLING THE DRAWER HANDLE
- Insert the drawer handle screws (G) into the
pre-drilled holes in the drawer .
- Attach the drawer handle (F) and hand tighten
the drawer handle screws (G).
DRAWER REMOVAL AND REPLACEMENT
- To remove the drawer, pull it out to its fullest
extension . On each of the drawer slides there
is a black lever . Push the lever on the left slide
up and the lever on the right slide down . You
will hear a click sound . The drawer should now
slide away from the cabinet .
- Reverse this procedure to replace the drawer .
QL063
All manuals and user guides at all-guides.com
CAUTION: Do not place side load onto
feet when rotatig the cabinet .
A
F
G
Right drawer slide
Left drawer slide
Black lever
6
H
Black lever