Table des Matières
Publicité
Service Illustration
This illustration shows the location of service grease points for
BA-201 and BK series buckets. BK-2612 bucket is shown, but
grease points are the same for all BK series buckets.
Grease pivot pins every 50 hours of operation.
Follow the maintenance schedule in the operator's manual.
Bucket Teeth
• The bucket teeth are replaceable. Check condition weekly.
Replace if chipped, bent, or damaged.
BA201
Hydraulic Hoses
• Check the condition of all hydraulic lines, hoses, and fittings
each use. Replace any that are damaged.
• Re-route hoses that are chafed, rubbing, pinched, or
crimped. Tighten any fitting that is leaking.
11
Publicité
Table des Matières
