Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
STREETLIGHT 2018
IMPORTANT SAFEGUARDS
When using electrical equipment, basic safety precau ons should always
be followed including the following:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
1.
To avoid the possibility of electrical shock, turn off power supply before
installa on or servicing. Installa on and servicing should be performed
by qualified personnel.
2.
When closing cover of fixture, be sure all wires are inside housing to
avoid pinching wires.
3.
If Photo Receptacle is installed refer to "Photo Control" sec on for
instruc ons.
4.
Product must be installed in accordance with your local electrical code.
If you are not familiar with these codes and requirements, consult a
qualified electrician.
5.
Do not change the structure or any commponents of the fixture to
ensure safety.
SAVE THIS INSTRUCTIONS FOR FUTURE REFERENCE
TO INSTALL:
Adjustable lt angle: ±0-5-10-15º
Horizontal Installa on
Hoop
4
clip
REV190320CLZ-01
+15°
0
-15°
Ver cal Installa on
3
Slo ed
screwdriver
clip
Allen Wrench (8mm)
5
INSTALLATION INSTRUCTIONS
100-240V/277V AC, 50/60Hz, Suitable for Wet Loca ons (IP66), Class I
*Max installa on height: 15M
*Pole fi er diameter: Φ 60mm (2.4") / *48mm diameter need longer screws
*This product must be grounding
Power
Dimension
25W
35W
614 x224 x135 mm
55W
60W
90W
726 x357 x127 mm
120W
120W
150W
861 x447 x153 mm
180W
200W
+15°
0
-15°
STANDARD MOUNTING
power turn
STEP 1:
off protector
Adjust the mul -angle fi er (0, 5 ,10, 15 degree ver cal
and 0, 5,10, 15 degree horizontal) to proper posi on by
4mm (5/32") allen wrench.
STEP 2:
Open the le and right clips on the back of
Surge
the luminaire. See
Protector
STEP 3:
Insert the pole and external power cord into
the luminaire cavity and hoop of An -falling
rope.Thread the power cord through the M16
wiring harness retainer. Reserve the related
length of wire for connec on. Keep the base
in horizontal level.Fix the luminaire and pole
by allen wrench.Tighten the hoop on the pole
by Slo ed screwdriver See
STEP 4:
Connect the external power cord to the
power turn off protector plug and complete
the electrical connec ons.
STEP 5:
Close the cover and clips. See
EPA
Weight
5.8 kg
0.165 m²
5.9 kg
6.0 kg
7.8 kg
0.311 m²
8.1 kg
8.2 kg
12.0 kg
12.0 kg
0.462 m²
12.1 kg
12.2 kg
1
See
.
1
.
2
.
3
4 5
.
Publicité
Table des Matières
