Power On - SoFlow Lou Board 1.0 Manuel D'utilisation Original

5.2 Power on

1. Turn on the Lou Board, by moving it a short distance on the floor forward. The board activates automatically and
powers on. The remote control can be turned on by choosing one of the two riding modes.
2. The Lou Board and the remote control are now automatically establishing a connection. Through slight pressing of
the throttle, you will notice that the motor is responding and the connection is therefore established.
3. Now you can control your Lou Board with the remote control.
If the remote control does not connect properly to your Lou Board, or you have acquired a new remote control, follow the
instructions in chapter 4.3 establishing the remote connection.
copyright by www.louboard.com
The remote control can be charged with a USB charge
cable. If the indicator light turns green, the battery of the
remote control is charging. If the indicator light turns off,
the charging is complete.
24
Flowpad Bedienungsanleitung
User Manual