Connecting The Power Inverter Using Vehicle Power Cord - Honeywell HW400PI Guide D'utilisation

All manuals and user guides at all-guides.com
Operation

Connecting the Power Inverter Using Vehicle Power Cord

Read and follow all "Safety Messages" on page 1 before connecting the power inverter.
The vehicle power cord is used to provide up to a total of 100 watts of power.
1
9 www.honeywellpowerinverters.com
Connect the red positive (+)
ring terminal to the power inverter
positive (+) DC terminal post.
Confirm the LED
5
indicator is green.
Plug in other appliances
8
following steps 6 & 7, if desired.
NOTE: Do not exceed 100 watts of power
when using the vehicle power cord.
Connect the black
2
negative (-) ring
terminal to the
power inverter
negative (-) DC
terminal post.
Plug the power inverter
3
into the vehicle's
accessory outlet.
Turn the power inverter on.
4
Turn off the appliance
6
to be powered.
Plug in and turn
7
on the appliance.
HW400PI Power Inverter Owner's Manual