Cube - Ecler CORE Mode D'emploi

15.3. CUBE

Inputs
Outputs
Nominal Output level / Min. Load
THD+N (at RX AUX OUT)
Signal Noise Ratio (at RX AUX OUT)
Internal Loudspeaker
Power Amplifier
THD+N (1kHz Full Power)
RF Wireless Audio
Transmission Recommended Distance
Latency (I2S digital audio to RX output)
Inter-channel delay error (speaker - speaker)
Type CH1 / CH2: Digital, Mono, RF Wireless Audio
Input Sélecteur CH1 / CH2: via WiSpeak grip app
Controls VOL: via WiSpeak grip app
SOLO: via WiSpeak grip app
ID TEST SIGNAL: via WiSpeak grip app
PAIR / UNPAIR: via WiSpeak grip app and
Panel button
Type Internal Loudspeaker: Analog, Mono, Self-
powered
AUX OUT: Analog, Mono, Balanced, Euroblock
0dBV / 10kΩ
<0.015%
>95dB
Size 5" woofer + 1" tweeter
Impedance 8Ω
Ways 2
Sensitivity 1W / 1m 83dB
Frequency response 70 - 20kHz
Power (8Ω, 1% THD) 32W
<0.15%
Frequency band U-NII 5.1 – 5.8GHz (supported worldwide)
Up to 24 non-overlapping RF channels
DFS support
Up to 12m from a TX to any paired RX, direct
line of sight
Audio transmission 24bit uncompressed, 48kHz SR
Audio channels WiSpeak CH1 / CH2
5.1ms, fixed
±1us
Reconnection time Up to 120s
Pairing time Up to 120s
37
1
3
3
2